OL270 Auto Small Home Electric Business Card Cold Laminator

The preparation work of the OL270 Auto Small Home Electric Business Card Cold Laminator is outlined as follows.
Material preparation: Make sure there is enough cold laminating material and business cards or documents to be laminated.
Machine inspection: Check whether the machine is in good condition, including the power connection, whether the laminating material is installed correctly, etc.
Loading material: Install the cold laminating material on the machine correctly according to the instructions of the machine manual. This usually involves placing the film roll in the designated loading position and pulling it to the working area through the machine's guide system. Place the business cards or documents to be laminated in the designated paper inlet or on the workbench, making sure they are flat and wrinkle-free.
Start the machine:  select the corresponding operating mode. The machine starts working and presses the cold laminating material onto the surface of the business card or document through the internal mechanical structure. This process is usually continuous until all business cards or documents are laminated.
Cleaning and maintenance: After use, clean the working area and components of the machine regularly to ensure its long-term stable operation and extend its service life, and perform necessary maintenance and care work according to the instructions in the machine manual.